(3) Select Print nozzle check pattern, and press the OK button. (2) Select Maintenance, and press the OK button. Open the Paper Output Tray gently, and open the Output Tray Extension. Make sure that one or more sheets of A4 or Letter-sized plain paper are loaded in the Cassette. You need to prepare: a sheet of A4 or Letter-sized plain paper If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Select ON to prevent double-feed of plain paper.īe sure to set this back to OFF after printing since it may result in lower printing speed. Selecting ON will prioritize the printing of the Exif information in the image. If printouts contain margins even though you are performing borderless printing, specifying Amount: Large for this setting may help solve the problem.
When performing settings from application software or the printer driver, these settings will be prioritized. Settings will become ineffective in the following situations: You can change the width to be cropped from the borders of the original image as needed.
When performing borderless printing, slight cropping may occur at the edges since the printed image is enlarged to fill the whole page. Selects the amount of image that extends off the paper when printing in borderless (full). Use this setting only if the print surface becomes smudged.īe sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality. Press the right arrow button until Device settings appears, then press the OK button. With the printer powered on, press the Setup button. Follow these steps to access Print settings on the printer.
0 kommentar(er)
